Author Topic: Ultima Ratio Regum (0.8 released after five years!)  (Read 253034 times)

Avagart

  • 7DRL Reviewer
  • Rogueliker
  • *
  • Posts: 567
  • Karma: +0/-0
    • View Profile
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #150 on: January 22, 2016, 12:05:22 AM »
Your Teemu isn't the game?

Krice

  • (Banned)
  • Rogueliker
  • ***
  • Posts: 2316
  • Karma: +0/-2
    • View Profile
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #151 on: January 22, 2016, 08:22:25 AM »
Your Teemu isn't the game?

It's a game, thanks for your concern.

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #152 on: January 22, 2016, 04:13:05 PM »
since I'm not really making an RPG in the traditional stats-and-numbers sense.

You are not making a game?

I'm not making a traditional stats-and-numbers RPG, no. I'm doing something quite different (and have been for a few years!).

Krice

  • (Banned)
  • Rogueliker
  • ***
  • Posts: 2316
  • Karma: +0/-2
    • View Profile
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #153 on: January 22, 2016, 05:36:38 PM »
I'm not making a traditional stats-and-numbers RPG, no. I'm doing something quite different (and have been for a few years!)

What is so super secret that you can't tell about it? I'm just saying. When I started Kaduria I had an idea that I could like create the world, monsters, items etc. and then start to work on that pesky RPG system, but it turns out that I was wrong and did lot of work for no reason. Now I'm practically starting from square 1 with the RPG system and then design game objects for that. Of course some of the objects and monsters are going to be there anyways. And luckily I think dungeon generation is such a detached part of everything that it's possible to create it without knowing anything about the RPG system. But whatever you are using, it's always better to match objects etc. data for the RPG system. Otherwise you have a bunch of random items without any kind of balance.

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #154 on: January 22, 2016, 08:33:56 PM »
Nothing's secret! It's all over my blog; it's an exploration/discovery/puzzle-solving game with obscure procedurally-generated riddle-like clues scattered through the world's generated cultures/religions/societies/people. Combat will appear, but as an advanced option for advanced players rather than the norm. The world has to be massively detailed, therefore, before you can even begin to engage with it on the level I have in mind.

Krice

  • (Banned)
  • Rogueliker
  • ***
  • Posts: 2316
  • Karma: +0/-2
    • View Profile
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #155 on: January 23, 2016, 01:10:59 PM »
it's an exploration/discovery/puzzle-solving game

It's worth following how are you going to make that interesting. At least it sounds boring, but who knows?

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #156 on: January 23, 2016, 01:45:49 PM »
Who indeed...  ::)
« Last Edit: January 24, 2016, 03:09:45 PM by UltimaRatioRegum »

Krice

  • (Banned)
  • Rogueliker
  • ***
  • Posts: 2316
  • Karma: +0/-2
    • View Profile
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #157 on: January 25, 2016, 09:28:31 AM »
Who indeed...

No one knows. But it'll be interesting I guess. And of course it's always possible to add the RPG system later.

AgingMinotaur

  • Rogueliker
  • ***
  • Posts: 805
  • Karma: +2/-0
  • Original Discriminating Buffalo Man
    • View Profile
    • Land of Strangers
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #158 on: January 25, 2016, 01:20:27 PM »
Never give up, Krice! You've got him cornered now!

As always,
Minotauros
This matir, as laborintus, Dedalus hous, hath many halkes and hurnes ... wyndynges and wrynkelynges.

Worthless_Bums

  • Newcomer
  • Posts: 44
  • Karma: +0/-0
    • View Profile
    • Steam Marines - squad based roguelike
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #159 on: January 25, 2016, 02:46:09 PM »
I'm ashamed to say I've been refreshing this thread repeatedly for the last few days.

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #160 on: January 26, 2016, 10:35:56 AM »
I am greatly entertained by both the above posts, but moving swiftly on...

-----

First, sorry about the late update this week! I had a ton I wanted to get finished for this update, and I came close, but needed some of an extra evening to actually get it all done, hence the late Monday post (next week we’ll be back to the usual weekend stuff). This week we have a fairly major update again – more work on scheduling, pathfinding, and so forth – and a bunch of minor updates on various things that needed finishing or improving before 0.8’s release. Scheduling and pathfinding for important NPCs is coming along well, but is still not finished, owing only to the immense difficulty of the task (pretty much all my spare time is currently going into this) – but I’ve pushed well past the 50% mark now, probably to around 75%, and with a really concerted push this week we should be almost completely finished by next week’s blog post. So: this entry is going to update you all on that big task, alongside a bunch of other smaller things…

…but first…

Fancy coming to work with me for 9 weeks?

Are you a student? Fancy coming to work with me on procedural generation for a few months? Now’s your chance! We’re looking for two people to come and join myself and Dr Sam Devlin(https://www-users.cs.york.ac.uk/~devlin/) and Dr Gareth Beale(https://www.york.ac.uk/digital-heritage/members/gbeale/#research) on a nine-week project for the “YCCSA Summer School”(http://www.york.ac.uk/yccsa/activities/summerschool/) to examine methods for setting rules and subsequently generating a particular category of building – those that have strict and explicit social rules to their layouts and their use by different categories of human actors. For example, this could include religious buildings, hospitals, police stations, prisons, airports, military bases, etc. The exact direction of the project can be altered to fit the right candidate, but that’s the basic outline now – generating architectures of buildings with clear social, not just architectural, requirements to their physical layouts. YCCSA is the York Centre for Complex Systems Analysis, and is a highly multidisciplinary research group that the three of us are all currently a part of.



As above, you must currently be a student, though you can be from any field and any country. We’re looking ideally(http://www.york.ac.uk/media/yccsa/documents/summerschool/2016/Algorithmic%20Generation%20of%20Social%20Architecture.pdf) for one computer scientist and one artist (2D or 3D are both fine), but that’s open to change if particularly good candidates from other backgrounds apply. You’ll be housed at the University of York in the UK for the nine weeks during which this should be your full-time occupation/work, and we’ll (i.e. you, me, Sam, Gareth, and the other person) meet up at least once a week to discuss the project. We may well collectively get a paper or conference submission out of the project at its conclusion, which would look extremely strong on any undergraduate CV if you plan to pursue further study. If you’re interested, feel free to ask some questions here, send me a message, etc, or pass this on to your friends if you aren’t eligible but you know someone who is. The competition is usually pretty fierce for the positions, though, so you’ll definitely need a strong CV to be successful. Deadline for submissions is March 17; hopefully we’ll get some applications from some roguelikers and produce something innovative and interesting! If for some reason you aren’t an undergraduate student this year but will be next year, I would expect similar opportunities to arise in 2017 and 2018 too, which I’ll announce as and when…

Now, onto the URRpdate proper:

Scheduling

I’d say I’m… 75% finished on AI scheduling and pathfinding for important NPCs? As far as I can tell, we’re now at the stage where:

All important NPCs spawn correctly in their houses and can be seen sleeping/behaving within those houses.
All important NPCs whose day jobs are OUTSIDE buildings – e.g. guards who guard outside a building, or gladiators, or merchants in open-air markets, and so forth – all now have perfectly working schedules and find their way to their jobs, irrespective of where the player is, what the player’s doing, etc.
What this means is that one can follow an NPC from sleeping in their bed all the way to walking half-way across the map, through exchanging their guard post with another guard, and then track that guard all the way back to their home in another district, and watch them go to bed. Although this might not seen all that tricky to code, the complexity emerges when one considers that due to the size and scale of the world map, it is of course chunked. Only the map grid the player is currently in is loaded, whilst the rest of the world is stored elsewhere in your save files. The same also applies to buildings, which are only actually generated when the player first steps inside, again to save on generation time and memory usage.

What this means is that there are many, many variations of scenario that can apply to something as seemingly simple as just having an NPC move across a map:

Their house has been spawned.
Their house hasn’t been spawned.
Their home district has been spawned.
Their home district hasn’t been spawned.
Each district between their home and their work has been spawned.
Each district between their home and their work hasn’t been spawned.
Their work district has been spawned.
Their work district hasn’t been spawned.
The player is in their home district.
The player is in a middle district between home and work.
The player is in their work district.
The player moves between districts whilst the NPC is moving, thereby spawning and despawning areas of the map whilst the NPC is trying to move through those areas!
Therefore, the NPC might enter unspawned areas, enter spawned areas, leave unspawned areas, leave spawned areas, and must have their schedule consistent as they move between these different areas, whilst always making sure that if the player “looks in” on them at any time in their schedule, they are doing the right thing, just as the player might enter/leave spawned/unspawned areas with NPCs going about their thing.
This has necessitated four major systems – we have a list of “potential NPCs” who have yet to be spawned and who have thus far moved entirely in the abstract, a list of “abstract NPCs” who HAVE been spawned but have since been de-spawned due to the player moving away from the map grid they’re in, active “creatures” on the map grid the player is currently on, and abstract “building” creatures for creatures who have been spawned, but are now in a building, but the BUILDING hasn’t been spawned. All NPCs are thereby shuffled between each of these four categories, each of which can be accessed or acted upon in various ways according to the player’s location and the status(es) of the NPCs within them. This is by far the least complex system I was able to come up with for handling all of this, and it’s actually coming together now! You can track people all across different districts irrespective of your movement and their movement, and they always turn up in the right places at the right times. The remaining AI stuff is all to do with handling NPCs whose schedules take them indoors (for their work, not their homes), of whom monks are going to be the most challenging, though I don’t anticipate TOO much difficulty for the others…

Clothing Implementation

Clothing has now been transferred out of my graphics-testing python file and implemented into the game proper. Everyone in nomadic and tribal nations now therefore wears all the appropriate clothing, which like all other clothing can be examined. This means all four major clothing types for this release – feudal, religious, nomadic, tribal – have been implemented, at all ranks from the lowest peasant to the highest ruler, leaving only armour to be generated in a later release (probably the next release, 0.9).





Counties

Vassalage nations now split their land up into counties, or regions, or districts, or duchies, or whatever the nation calls them. Each is roughly centered upon a town, and therefore “owned” by the lord, count, viscount, duke, or whatever the nation calls them, that controls that town (and thus mansions spawn in those towns to house these important people, and town halls do not generate as these nations would not have mayors for their towns). I’ll be doing a little more with this system later, but for the time being, here are some example maps of the vassalage-y nations and the counties they created (shown by arbitary colour differences, though when you view them in-game, you get colours of the house in question that rules the area). I’m happy with the kind of size these regions are, and it’ll add another nice bit of variation to a couple of nations each time. There are still a couple of minor peculiar bugs to work out here, but it should be resolved soon:



Castle Basements

Castle basements have now been finished as well, and can contain slave quarters, and a torture chamber or dungeon, and potentially… other stuff as well? They often have two parts and two down stairs, if for example the nation keeps slaves and there is a dungeon or torture chamber, as those would be accessed from separate staircases (though I just need to make a mental note to ensure that the AI can figure that out!). Here is an example, going from the slave quarters, back into the main body of the castle, and then down the other staircase into the dungeon (which is much nicer than jails, since these dungeons are for important prisoners). Upper floors are being changed a little, but I should be able to show them off next week.



Jail Bedrooms

Jailers now have bedrooms which are underneath the jail, rather than having them sometimes leave and return and so forth. This was a slightly strange solution, but I decided it was a solution I was happiest with rather than having jailers leave and return in the morning (leaving prisoners alone would seem strange) or having jailers who take many shifts (I didn’t like this and wanted to emphasize that jails *belonged* to the jailers on some level), so there is now only one jailer who sleeps in a “secure” chamber below the jail. These bedrooms are minimalist and simple so they aren’t really worth showing, but suffice to say that that’s where they now appear.

Harems

Although the appropriate NPCs will not actually exist in this release – they join a list of NPCs like inquisitors and explorers who will be added in 0.9 – there is now space in castles and mansions for the rulers/lords to have a harem, of either sex/both sexes (depending on cultural practices, accepted norms, and the orientation/age of the ruler). Harems contain reclining couches, which are a new form of furniture I very quickly set up a really cool generation algorithm for, and I really like how these look. Right now these couches only appear in these areas, although I might change that in the future. The couches themselves are, of course, both coloured and patterned according to the family whose mansion you find them in, or the ruling house if they’re found in a castle, so here are some examples of reclining couches with the coat of arms that would have them next to them, whilst the shapes emblazoned on them are dependent on the civilization to which they belong, in this case three “lesser” houses in a vassalage nation and one major house:



What next?

This week I’m still working on scheduling/pathfinding, and will be focusing on getting all the scheduling around castles working, and then moving onto those who need to schedule their way into, and around, buildings, and then those who spend their entire schedule within certain buildings (such as certain categories of priests). If the progress on scheduling seems slow, please let me assure you it isn’t, and basically 100% of my spare time is on URR development at the moment – it’s just a huge, complex, and challenging task. But I’m definitely well past half-way and I can see how it’s all going to (finally) come together, even if there’s still quite a bit of ground to cover. See you in seven days!

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #161 on: January 31, 2016, 08:45:00 PM »
I was hoping for a large scheduling/AI update this week, and although significant progress has been made, the game’s code is currently quite unstable and uncooperative for the taking of screenshots, and replete with bug-tracking code that slows the game down to a crawl and makes taking nice gifs quite challenging. So, rather than doing a scheduling-and-other-things update this week and the same next week, I’m going to do a brief other-stuff update this week, and a much larger scheduling update next week with a massive volume of screenshots. Aside from the improvements to scheduling, two small other things have been done this week – banner graphics, and the upper floors of castles. That’s all for this brief post, I’m afraid, but we’ll make up for it next week with a massive and more tech-focused AI entry.

Banners

I’ve generated the graphics for banners, which are somewhat like flags except they can only be found inside castes, and probably inside mansions and manors as well once I get around to adding them in. In castles, in vassalage nations, you will always find a corridor lined with the banners of all the lesser houses in that nation. Here are some examples (the frills at the bottom of course vary with civilization preference shape) – these are quite simple, but I’m very content with how they look, and that’s another one I can tick off the list of the last remaining graphics for 0.8. With that said, they might be just a little dark, so I may lighten them just a tad.



Castle Upper Floors

I returned to the upper floors for castles and made some major changes, almost entirely in order to just make them less boring, as they were looking rather uninteresting beforehand and a bit too hand-made. The system used here is again (like castle basements for slave quarters, dungeons, etc) quite similar to the algorithm used in crypts to connect areas and draw corridors, and so forth, but this one is rather more fluid. It places all the important rooms first, including a harem if appropriate (the new dark red icons you see there are the reclining couches we talked about last time, and their colour varies according to the coat of arms of the house to whom they belong), and then ensures they can all path back to the up staircase that brings you to that level. This first stage results in something that looks like this:



If the castle is smaller and there’s a garden in the centre of the castle, you get something like this, since it’s rather harder to generate appropriately – but I actually rather like it! You’ll note that in this case the harem is not placed directly adjacent to the master bedroom, since in many cases that wouldn’t fit, but is instead positioned at a distance with a corridor that then paths in to the main sequence of bedrooms. This gif nicely illustrates the gap in the centre for the octagonal garden in the middle, then the player goes upstairs, and you can see the rooms loop around the middle bedroom.



I’m content with how these look – as ever, it’s hard to make upper floors fascinating when there are only so many ways to draw a bedroom, but they’re distinctive, they get the job done, and leave plenty of room for me to potentially add other things in the future, if anything useful presents itself. So now here’s a little gif using wizard/admin mode, to look at the three layers, from top, to middle, to bottom, to middle, to top. Note also that the corner towers where guards and soldiers live are present on both the ground and upper floor, but the overall shape of the castle is irrelevant underground.



And lastly (I just added this at the last second before posting this entry), here’s an upper floor for a democratic civilization that doesn’t have an ornate throneroom on the ground floor, but rather a bedroom with two sections – one for general governance and receiving relevant people, and a secondary part for the elected ruler to sleep in. Like ground-floor throne rooms, they vary heavily based on ideology, but in this picture you can see it in the top-left corner of the circular castle, and the middle of the “cross”-ular castle, both of which have harems attached (although roughly 1/3 nations will have those, I temporarily activated them for all nations just to help me test the room-placing algorithm).



AI Stuff

Oh, all right  – one brief AI thing. The best thing I’ve seen all week is this debug screenshot, where guards were coming in and out of a mint from all directions and timings and data structures, and sure enough, they all showed up on time (displayed here as the white tiles) and every single guard was there, no matter what the player had been doing and what parts of the game world were spawned and loaded, spawned and unloaded, or unspawned and unloaded. The most beautiful image I’ve ever set eyes upon.



What next?

Moving closer to all this AI work being finished! I cannot wait to be done with all this and be able to watch all the important NPCs going about their days. Once all of this is done, and all the current minor bugs (~a dozen) are fixed, I’m actually going to take a week or so off from URR development. Honestly, the extended crunch to getting this AI stuff finished has been really tough and lengthy, and once it’s done, I’m going to recharge a little bit before I start work on dialect generation and the conversation system (though I will probably continue brainstorming those aspects in the interim). I have a particular game I’ve been desperate to play for a long time, and having finally acquired (second-hand) the console required, I’m actually going to give myself a little time off to play the thing. Don’t worry, blog posts will of course continue! But I do feel a little burnt out for the first time ever, and I just have to have a little coding rest once this huge block is finished, so chances are next week will be “AI is almost finished”, the week after will be “AI is completely finished!!”, the week after will be something else, and maybe even the week after that, and I know this will push back 0.8 a tiny bit further but I just really need a bit of a break. Once that’s all done, though, we’ll start thinking about dialect generation. See you in a week for a big AI update!

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #162 on: February 02, 2016, 01:02:41 PM »
Meanwhile, emerging from recent discussions between myself and Darren Grey, a very important thread about the future of Roguelike Radio has just gone up - all feedback here/Reddit/elsewhere welcome! https://www.reddit.com/r/roguelikes/comments/43u2ju/the_future_of_roguelike_radio/

UltimaRatioRegum

  • Rogueliker
  • ***
  • Posts: 318
  • Karma: +0/-0
  • Username says it all, really.
    • View Profile
    • Ultima Ratio Regum
    • Email
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #163 on: February 07, 2016, 11:05:53 PM »
A big URRpdate this week, as we hit around 80% completion on the scheduling and pathfinding for all the world’s important NPCs, and also add some smaller additions like banners, drawbridge chains, and finishing off the upper floors of castles. At this point you can now track NPCs leaving their home and going INSIDE buildings – and this again works regardless of what the player does, where the player is, what maps/buildings have thus far been spawned, etc. This is, to put it mildly, a landmark moment. It works completely for guards in mints, and banks (though I have yet to test arenas and archives, but those are the first tasks I’ll be working on checking this coming week). It’s always hard to tell how much code written to deal with Situation A will actually also apply to Situation B until you give it a shot, when the Situations in question are so complex and have so many variables, but I think this code should be entirely transferable. I hope.

Scheduling

So, it’s time for some gifs! Various gifs here of guards leaving districts, entering districts, entering buildings, leaving buildings, exchanging guard duty with others, etc. Guards now work correctly for all outside guards, and almost all inside guards work correctly, and any and every weird combination of movement across the map and the player’s actions also, as far as I can tell, work perfectly.











However, all of this has given rise to a very amusing bug. So, consider this: the world map is split into map grids, each of which is 200×200 tiles when spawned but naturally starts unspawned, and each map grid might contain a range of buildings. When the world is generated I can check exactly what buildings will be in each district, but naturally in most cases I don’t know exactly where each one will be placed – since that would entail spawning the entire map, on the human rather than world scale, at world gen! Which would be absurd and take probably the best part of an hour or something, possibly more (I’ve never tried it and don’t intend to).

Now, consider this. The player is in Map Grid A. In Map Grid B is a guard, who is due to leave their house and move into Map Grid A, to relieve another guard on guard duty. Map Grid B has never been spawned. How long, therefore, should this first action – moving from B to A – take? No matter how any map grid spawns, moving from any point of a map grid to an appropriate edge can never take more than 200 turns, and therefore all movement of this sort, in unspawned areas, takes 200 turns. Were it spawned, it might “actually” take 20 turns or 190, but we have no idea what the correct number would be until spawned, and since it hasn’t been spawned, I play it safe and assume 200.

With me so far? Splendid. Now, let’s say that the guard leaves their (unspawned and nonexistent) home at turn 1000, and therefore is due to leave Map Grid B and enter Map Grid A at 1200. Now, the player is sat in Map Grid A. If the player waits until turn 1190, and then enters Map Grid B, it will then spawn all the buildings and have the NPC do 190 turns of their action. However, what if this building is near the edge to Map Grid A? Let’s say they get there with 90 turns left. Ordinarily, they would go through, and then take 90 turns on the other side… but that would mean if the player immediately went back through, from the player’s perspective, upon returning to Map Grid B, it would appear as if in two turns an NPC had just appeared and teleported ninety tiles up the map grid! Therefore, if an NPC is just about to cross grids, and the player is about to enter that grid, it takes them to an earlier step in their movement so that the player, just entering Map Grid A, sees the NPC for a few turns before they go into Map Grid B. However, what this means, is that if the player keeps hopping back and forth, the NPC keeps getting pushed back and never actually moves through until the player goes somewhere else! It’s very silly. I’m not sure how to fix it yet, though it probably needs some kind of counter that notes if the NPC has already been pushed back once in its current district, and resets after moving to a new grid. But still: it’s an interesting example of the complexity of the system, and some of the weird situations that arise, and how I’ve tried fixing them.

To further illustrate this point, here are some examples of the scenarios that can arise:

- Player is in a map grid and an NPC moves into that map grid, and should physically spawn.
- Player moves into a map grid, and all stationary NPCs outside buildings (e.g. guards) must spawn.
- Player moves into a map grid and another important NPC is moving in that map grid, and must spawn in the right place, an appropriate way along their schedule according to the timing of their schedule.
- The player follows an NPC into a new grid, and the NPC should be x turns away from the edge of the grid once they are spawned, despite having been unspawned after leaving the player’s grid.
- NPC enters unspawned building, player stays in grid, things must happen in building that doesn’t exist.
- Player is in grid with unspawned building and NPCs within that unspawned building need to leave.
- Player is in grid, NPC enters building, player leaves, NPC must be handle its behaviour in unspawned building and unspawned grid.
- As above, but player enters building first, leaving a spawned but unloaded building in a spawned but unloaded grid.
- Player enters building part-way through NPCs doing behaviours within it, causing it to spawn for the first time, and they should all be at the right part of their schedules…

Basically, consider every variable of 1) the player’s action, 2) spawned grids, 3) spawned buildings, and 4) important NPCs moving through all these, and I cannot begin to describe all the variations. Naturally in many cases a piece of code I wrote to resolve Scenario #14 also worked for Scenario #26, and so forth, but in many cases it didn’t and a massive amount of code had to be written to handle every possible variation and permutation. But I think a large part of it is now done.

Drawbridge Chains

What is says on the tin, really.



Next Week?

Dare I hope… AI pathfinding/scheduling… finished?!?!?!?!

Aleksanderus

  • Rogueliker
  • ***
  • Posts: 179
  • Karma: +0/-0
  • Champion of the unknown
    • View Profile
Re: Ultima Ratio Regum (v 0.7 released, 18th April!)
« Reply #164 on: February 08, 2016, 11:45:30 AM »
Combat will appear, but as an advanced option for advanced players rather than the norm.
Well, we'll see if this won't be a norm.  ;D

EDIT: But how the character will gain money then, by work and theft? I don't want to make my character a thief. And also I think this will be more like simulation than a boring puzzle game.
« Last Edit: February 08, 2016, 11:50:38 AM by Aleksanderus »